Car Turntable

Turns a car in place, so you drive out forwards.

Website product summary · English

Overview

Specifications

Models
CTX4 · CTX45 · CTX48 · CTX56 · CTX6 · CTX65
Drive
Electric drive
Diameter
4.0–6.5 m
Capacity
4,000 or 8,000 kg
Speed
About one turn a minute
Recess
210–355 mm deep
Slope
Up to 1:12 (5°)
Climate
−10 to +50 °C
Warranty
As quoted

For initial planning only. This is not a fabrication drawing or an approved project specification. Confirm the selected model, dimensions and site requirements with BAYERN.

Features

  • Turns a car round in a tight space
  • Flush with the floor, can be driven over
  • Six sizes, from 4.0 to 6.5 m
  • One or two cars on the larger decks
  • Push-button or remote control
  • Indoors or outdoors
  • Steel deck with a ribbed top, or a paver deck finished to match your driveway

Six models

“Large” means a bigger car, such as a full-size 4×4. “Paver finish, max.” is the weight of the finish you can lay on a paver-ready deck. Every model turns at about one turn a minute.

ModelDiameterClear zone ØCarsCapacityRecess, steel deckRecess, paver deckPaver finish, max.Motor, steel deckMotor, paver deck
CTX44.0 m5.8 m14,000 kg210 mm305 mm3,300 kg0.37 kW0.75 kW
CTX454.5 m6.0 m1 large4,000 kg210 mm305 mm4,150 kg0.37 kW0.75 kW
CTX484.8 m6.0 m1 large4,000 kg210 mm305 mm4,700 kg0.37 kW0.75 kW
CTX565.6 m6.0 m1 large8,000 kg355 mm355 mm6,000 kg0.75 kW2 × 0.75 kW
CTX66.0 m7.2 m28,000 kg355 mm355 mm6,800 kg0.75 kW2 × 0.75 kW
CTX656.5 m7.2 m2 large8,000 kg355 mm355 mm8,000 kg0.75 kW2 × 0.75 kW

Swipe sideways to see the whole table.

Deck finishes

Steel checkerplate, sandstone pavers, ceramic tiles, concrete, timber, aluminium plate, stencil concrete, polished concrete, cobblestone, exposed aggregate, asphalt or bound resin.

On site

  • A recess in the slab to the depth of the model
  • A drain at the bottom of the recess
  • Power brought to the drive at the edge
  • Concrete of 25 MPa or more; slab by your engineer
  • The clear zone kept free of walls and posts
  • Slope no steeper than 1:12 (5°)

Before you enquire

  • The building location and whether it is new or existing.
  • The intended use, required capacity and number of levels, where relevant.
  • Available clear dimensions, photographs or drawings, if available.
  • Access, power supply and the target project timing.

The final quotation confirms the equipment, warranty, service coverage, response arrangements and payment terms for your project.

Bayern Trading W.L.L. · info@bayern.qa

/en/products-and-services/turntables-car-platforms